I Need Rollers

Brock Landers · 03-04-2007, 08:15 PM

Hey Guys,
I hate to be a charity case, but alas, I am broker than I can tell you. I have to shoot my final freshman film and buy film for it which just ran me about 300 dollars.

Basically, Italian (my start date buddy) has inspired me to use the PJ again (even if its more inconvenient than regular we jelqs). I want results, so I want to go get them. The only problem is that my rollers broke a long time ago. I used replacement foam ones from a hardware store but the come pre split in the middle and i had to super glue them closed. This, as it seems to me, is only a temporary solution because after a few sessions with it, the split open or the super glue I used scratches the hell out of my dick (it had a little boo boo one day).

So basically I am asking from the bottom of my heart if anyone is willing to donate any rollers that they have that they arent using. I really dont care if theyre old, as long as they arent about to break open. I really wish I could pay you, or just support the PJ website which has given so much to me, but I just cant.

I could maybe trade you a DVD or two. Name any DVDs you want, I probably have them! I guran-damn-tee it. (I'm a filmmaker and film buff)

Betterman · 03-05-2007, 02:07 AM

If you can't JD. Then go to a different girth exercise in the meantime. I just use a shoelace, that has a little bit of vaseline on it from previous use. Tie it around your base until comfortable a few times. Then work the glans and shaft together. Or grab at the base to move the blood through the shaft to the glans. Notice I mentioned move not force. Holding period depends on what you feel.

This is just a thought.

JonPop · 03-05-2007, 02:15 AM

Hey Brock. Win the length contest and you will get a free PJ and 3 tubes of Enlargel. Good incintive?

Brock Landers · 03-05-2007, 06:43 AM

Convincing enough. I just dont want to be in this contest for material reasons. Im here to learn and grow but not for a reason above that. Community over self.

If no one has any rollers its cool, but if someone does and is willing to part or trade, Id love that and be very thankful for it.

wantItThicker · 03-05-2007, 01:16 PM

Like your "shoestring" budget workout Betterman.. never tried that, maybe I will.

My rollers are also giving out after about a year and a half.

Have you tried cable clamps Brock? They are very cheap way to do intense girth workout, but be very careful, only suggesting this as you must be experienced now having worn out a PJ. I have been clamping for last month or so, it takes time to learn but is very intense girth workout. Look at Marty's thread on this.

italiananglo69 · 03-05-2007, 09:29 PM

Have you tried bying that pipe tube insulation foam at home depot? (you use it to insulate hot water pipe)
you might be able to cut it and use that to get by until you have cash. it already comes with sticky tape on the inside of it.

JonPop · 03-05-2007, 09:39 PM

Quote:

Originally Posted by italiananglo69

Have you tried bying that pipe tube insulation foam at home depot? (you use it to insulate hot water pipe)
you might be able to cut it and use that to get by until you have cash. it already comes with sticky tape on the inside of it.

Post# 1. Brock already said about the insulation.

Quote:

Originally Posted by Brock Landers

I used replacement foam ones from a hardware store but the come pre split in the middle and i had to super glue them closed. This, as it seems to me, is only a temporary solution because after a few sessions with it, the split open or the super glue I used scratches the hell out of my dick (it had a little boo boo one day).

JonPop · 03-05-2007, 09:40 PM

Let me make a few inquiries about replacement rollers, I'll get back to you.

italiananglo69 · 03-05-2007, 10:17 PM

Quote:

Originally Posted by JonPop

Post# 1. Brock already said about the insulation.

sorry JP. i wonder if the pipe insulation is the foam he is talking about?
the glue is his problem. just use rubber bands on the edges to hold it together. i have done this for several months now and it works ok.

Brock Landers · 03-06-2007, 10:57 PM

whoa! great idea. DAMNIT! and my father is a rocket scientist! d'oh!

italiananglo69 · 03-06-2007, 11:36 PM

LOL i am not the one rolling dried glue on my penis.

Brock Landers · 03-07-2007, 12:10 AM

Touche, my bick dicked brother!

Loki · 03-10-2007, 09:51 PM

Brock,
When I re-did my rollers I used pipe insulation. I cut it to fit the outside diameter, made sure the ends fit together, then I used contact cement. I put the cement on the rollers and the back side of the foam, I put a very little bit on the ends, just enough not to have cement ooze out and get on the outside "let it tack up". After it tacked up I put the foam on the rollers.
Then I wrapped a piece of paper around the foam then I taped up the paper. I did this because the tape would pull off pieces of the foam, let it cure all night. Then unwrap the paper and tape then knock yourself out with you freshened device.

If you need to replace the rolls themselves, you could get some dowel rods, cut them to lenght, drill a pilot hole in each end "stay on center" then add the foam to the rollers. If you know somebody with a lathe, have them do the pilot holes for you. If you really want to have a nice set, have brass or bronze inserts put into the pilot hole "bushings", your device will run smooooth for a very long time, less friction and less drag.
I've thought of useing bearings, but they could rust and they would need to be oiled, don't thing I'd like to get oil on me there.

Brock Landers · 03-10-2007, 10:27 PM

I think I understand what you mean, can you post a pic or two tho?

Loki · 03-10-2007, 11:59 PM

Sorry bud,
I don't have a camara, but if you tell me what you aren't sure of I'll see if I can explain better.
PM me if you need to.

Loki