Manzwa

Flook,
I put the socks on before putting on the base of the PM. One at the base and the other just under the glans. It helps and discomfort that occurs after wearing the PM over time.

I actually have a trick I do to minimize the discomfort of the PM against the scrotum. I take an old bandana, then folded it in a shape that is rectangular. Then I cut a X in it so I can insert my unit in the hole with the length cloth hanging over the scrotum. I put the cloth over the socks and then place the base of the PM against the cloth. Then I strap in with the velcro surrounding the strap. The cloth against the scrotum really relieves the stinging feeling the PM can cause after releatively long use. The velcro prevents the strap from loosening due to tension and reduces the pain to my glans caused when slippage occurs.

Hope something here is helpful.
Manzwa

Flook

Manzwa,

I don't think that I've ever seen more helpful hints in one place since Heloise. Good lookin out. I definitely have to try those especially the bandana cause man o man sometimes it is rough.
Thanks again,
Flook

Flook

I'm not sure what to do. No matter how I wrap it I am getting pain. It is mostly on the rim of the head where I have the horrible pain. If I wrap it tight and pull the straps through so its tight then I turn blue and have to remove until it wakes up if I don't do it hard enough then I feel that pain on the rim of my head again. Tonight I took off all the wrapping and put powder on. It ain't that bad but then I slip through. I can't make it any tighter cause then I pinch my skin. I just want to get this right. I can take some pain but I'm starting to feel like a masochist. Does anybody have any ideas because I don't know what to do?
Thanks,
Flook

Manzwa

I have some suggestions. First, make sure your good and clean. Oils free. I have had the same problems. I noticed that after I power Jelq, shower it holds better. I think that is true for 2 reasons, one I am very clean. There is no sweaty oils ect.. And two, I am swollen from the work out. Here is something you might try. Get a partial erections after your cleaned up. Put your PM on with the partial errection and perhaps it will not need to be so tight and will not slip. Another thing that comes to mind. How you wear the socks can contribute to slipping. I don't wear it so the entire strap is laying on the sock.

Hope this helps!

Manzwa

Marty5379

Hey Flook: I'll throw my two cents in here with all the other good suggestions you've been given.

I bought a roll of "Johnson & Johnson First Aid Hurt-Free Tape." Mine is the 1 inch wide version, but a little wider would be fine. It sticks to itself, not your skin. I cut about a 10 inch strip and use it over and over again ... MANY times over.

Here's how I use it: Remove one end of the PM strap from the plastic housing. As for the other end of the strap, pull it until it is within about two clicks of being out all the way. Slide the PM base contraption over your penis as if you were getting ready to install. Next, grab your pecker by the head and pull to a firm stretch. Hold, and begin wrapping the tape directly behind the head. Over lap the first turn and then proceed down the shaft about 2 inches or so. Make sure you slightly overlap as you move down the shaft. You want to wrap all the skin. Also, keep the skin pulled back toward the base as you wrap. The tape stretches, so get it snug, not too tight, just snug. End the wrapping so that the end of the tape is on top of the shaft. With one end of the PM strap in the plastic housing, wrap the other end of the strap over the shaft so that it holds the end of the tape. The tape end should be positioned close to the head where the strap wraps around the shaft. Now you can feed the other end of the strap into the plastic housing. This helps to hold the tape. Then begin pulling the strap tight, one end at a time.

This first aid tape really solved any pinching problems for me. It adds cushion and, most of all, it stopped 99.9% of the shaft slippage I experienced without it.

Let me know if this is not clear and I'll give it another shot. Also, you might add the velcro strap to this setup for even better pulling potiential. It will help keep the strap from slipping through the housing. It's discussed in this thread or one similar to it.

And let me say I bought this first aid tape at Wal-Mart for a dollar or two for 2.3 yards.

councilman

i own a penimaster

that is some crazy stuff....i think pumping is better for length
and keeping the rod straight with all the jelging, tugging etc
it works like a cast.....i read on thundersplace all the curve
problems from jelg etc.



ebpl 7.5/7.75......mostly pumping....jonpops streching in tub
girth 5.25.....needs works hope power jelg helps

Flook

Okay thanks Marty I'll see if i can find some tape. I think I understand the directions. Can I really get a bend from Jelqing.
Thanks again,
Flook

Marty5379

Well, I don't know. I've jelqed 1,000 upon 1,000's of strokes and never got a bend. I am more inclined to believe that it will actually straigthen a bend. But that's just my opinion.

Mighty Mouse

Have to agree with Marty. Jelqing is probably the safest form of PE. It would seem that you would straighten out instead of curve it. But again, I've never had that problem.

Flook

Okay thanks fellas.

Flook

Hey Marty,
I haven't been able to buy the tape due to time and money among other things. I found some tape we had laying around the house and it didn't feel very sticky so I gave it a shot. Bad idea. Taking that sucker off was quite painful but before that I was pretty good. Anyway since I haven't had time to get to the store I put some powder on the tape so it wasn't so sticky. That is money. Thanks very much for the idea it works good. Before I kept having to loosen because it was just pulling but with the tape I can crank it up so thanks. I just wish I was able to put on the PM after PJ and stuff but oh well. Also I was reading what you were writing in another thread about what your wife said. I just wanted to say congrats about being close to your goal. That is pretty encouraging to beginners like me so hopefully I'll be saying the same.
Thanks again,
Flook

shaguar

JonPop,

I've been using the penimaster for a week now, logging 34 hours of stretch time so far and was wondering if you wear it up or down? I'd like to copy the way you wear it as I have a LOT of 6 also. I'm guessing you wear it up at 12 position?

Irishdan

Hey JP, glad you are making some gains, You mentioned a site "Rogers' Penis Advantage site" What is the address of this site?

How long have had your PM device now?

How much have you gained using the PJ device?

How much have gained using the PM device?

I have explained to my Wife that I am doing PE, by hand but not about the PJ device. She thinks I am "nuts" Trying to get a larger dick at my age (68) I am at present on Viagra, went to see the quack man today, he gave me a sample of Cialis which I will try and see if it works.

Thanks ID

kal

As for all of your comments on it, and Jonpops success with it, I took the plunge yesterday and ordered the penimaster. Now I am going to have that and the powerjelqer in my arsenal of pe weapons.

__________________
Hoy por tì, manaña por mì. ¿Què es el problema?

Irishdan

Hey Kal that is the best item I have read in some time. Thanks

"Sex is like poker-if you dont have a good partner make sure you have a good hand!"

kal

Hey irishdan, I'm glad I can amuse you!

__________________
Hoy por tì, manaña por mì. ¿Què es el problema?

JonPop

__________________
I've got a Tiger by the Tail

JonPop

__________________
I've got a Tiger by the Tail

Irishdan

Thanks for the info Jonpop. I am just making some progress using the PJ, I try to do about 60 a day, and 30 hand jelqs a day, with some stretches that last upto 30 seconds each. I do two day's on 1 day off, and 2 day's and two off.

What do think? Also I am making some progress about 1/2 in length and 1/2in in girth.

stef0607

Hi Guys

I really want a penimaster but there are so many different places that sell them,

Does anyone know where the cheapest and most reliable place to purchase one is because i don not really want to buy one from e-bay unless any one thinks its okay

Cheers every one

sikdogg

I bought mine on Ebay brand new for $139.

kal

Its perfectly fine buying one off of ebay(at least you can get it cheaper). I beleive the website I bought mine from is a-mansworld.com. Dont quote me, i just think it is.Anyway it is around $170 shipped in a plain white box from Germany.

__________________
Hoy por tì, manaña por mì. ¿Què es el problema?

Sisyphus

Hi Guys,
Just got my PeniMaster in the mail today and wondering if there are any guidelines on how much tension I should put on the thing from those of you with experience with it.
Thanks in advance for your help!
Sisyphus
P.S. I got mine off eBay for $112.50 plus $15.00 for express shipping and $1.50 for insurance for a grand total of $129.00.

RON2

Hey guys. I discovered that when I put on my PM when I had a woody, or close to it, that blood was trapped in my glans and the PM didn't slide off. My glans got a little discolored but still had sensitivity. Also, you know those things that you can slide on the tips of your fingertips when you finger your lady. Well, I put one on right below my glans and when I was tightening my PM it didn't pinch at all. It helped keep blood in the head , too.

Manzwa

Ron2,
I always get a semi before putting on my PM. Like you have noticed, the blood trapped in your glans helps restrain the strap. I use a cotton wrap before putting the strap on, then use a velcro strap to keep the strap from slipping as well as hold the straps finger grips down. This helps conceal the device.

Good luck,
Manzwa

Manzwa

I would like to add something I think is important about using the PM. It seems to me that how slow you increase tension is also as important as you reduce tension prior to dismounting from the PM. I suspect slowly reducing tension helps retain the elasticity where the opposed of releasing all at once may work against the end goal.

What does anyone else think about this idea?

Manzwa

kal

I re-read some posts here and decided to give the pm another shot. I just ordered the modified head attachment at www.autoextender.com , so when I get it and try it out, I'll be sure to report on it.

__________________
Hoy por tì, manaña por mì. ¿Què es el problema?